- Global Pharma News & Resources

Competitive Scenario: How COVID-19 impact the various companies of the IGBT-Based Power Semiconductor Market

Pune, New York, USA, November 20 2020 (Wiredrelease) Research Dive –:In electrical circuits, a power semiconductor is used to control or switch current (or power) in electrical circuits. These include the power metal-oxide semiconductor field effect transistor (MOSFET), power diode, Bipolar Junction Transistor (BJT), Insulated Bipolar Transistor (IGBT), and Thyristor. The IGBT is a combination of MOSFET and BJT used in a wide range of modern electronics such as trains, VSFs (variable speed refrigerators), electric cars, VFDs (Variable Frequency Drives), stereo systems, and air conditioners use insulated-gate bipolar transistor for switching the electric power.

Uses of IGBT-Based Power Semiconductor

When used in high-power consuming circuits, the IGBT exhibits better properties than the BJT. Also, when compared to the BJTs, IGBTs have very high switching frequency. As per analyst review , IGBT provides better thermal performance efficiency due to which it is widely used in electronic items, invertors, and others. In addition, IGBTs are widely used in power electronics applications such as power supplies and converters owing to its switching speed.

Reveal the Market Overview, Opportunity, Expansion, Regional Analysis, Market Trend, Key Companies Profile, Companies Strategies, SWOT analysis and Growth of IGBT-Based Power Semiconductor Market @

GBT-based power semiconductor is also used in a wide variety of applications ranging from consumer devices to automotive and industrial equipment. An increased adoption is also seen in IGBTs with 3-phase high output motor control inverters in EVs/HEVs, boost control in industrial power supplies & UPS, and resonance circuits for home appliances.

IGBT-Based Power Semiconductor vs. MOFSET

Generally, the gate-drive requirements of an IGBT-based power semiconductor are quite similar to that of a current rated power and comparable voltage MOSFET. This trails from the fact that both semiconductor devices have a gate structure, which is metal-oxide semiconductor (MOS) type. However, the key differences in terms of their gate drive requirements are listed below:

Compared to the MOFSET, the IGBTs have a higher threshold gate-emitter voltage. A higher gate-emitter voltage at elevated temperatures is required to ensure that the semiconductor device remains in saturation at the provided collector current. For both of these reasons, the game-emitter voltage (VGE) applied of IGBT’s should be at least 15 V. Similarly, in case of rated MOSFETs, an applied gate-source voltage (VGS) of 10 V is usually sufficient to ensure saturation across current and temperature.The similarly rated IGBT-based power semiconductor tends to have a lower gate-emitter capacitance compared to the similarly rated MOSFET. Thus, IGBTs series gate turn-on resistor value is frequently preferred to be higher. This helps in minimizing the potential for resultant and ringing EMI and also limits the turn-on dt/dv.

Can Multiple IGBT-Based Power Semiconductor be Paralleled?

Connect with Our Analyst to Contextualize Our Insights for Your Business:

There are a number of modern day IGBT-based power semiconductors, such as the new Renesas Electronics Corporation’s G7H IGBTs. This semiconductor device in its nominal current range has a positive VCE vs. junction temperature dependence. Typically, these IGBT-based power semiconductors can be paralleled if a few basic precautions are taken:

Devices should be fixed on a common heat copper/sink substrate.For each paralleled IGBT, the gate-drive layout is symmetrical.An individual and matching 2 to 4 Ω resistor should be placed in series with each gate of device. This minimizes the possibility of potential gate-voltage oscillations of in one semiconductor device coupling into another paralleled semiconductor device.In terms of sinking and sourcing current capability, the gate driver is strong enough to ensure fast-switching speeds. For instance, let’s pretend there are four or more paralleled IGBT-based power semiconductors, and each with a total gate charge requirement of 100 nC. Thus, it is forced that the turn-on time should be within 100ns, and the gate-drive circuit’s minimum sourcing current capability needs to be at least.

However, it is always best to contact the manufacturer of IGBT-based power semiconductors for advice for the precautions to be taken for further paralleling multiple devices.

About Us:
Research Dive is a market research firm based in Pune, India. Maintaining the integrity and authenticity of the services, the firm provides the services that are solely based on its exclusive data model, compelled by the 360-degree research methodology, which guarantees comprehensive and accurate analysis. With unprecedented access to several paid data resources, team of expert researchers, and strict work ethic, the firm offers insights that are extremely precise and reliable. Scrutinizing relevant news releases, government publications, decades of trade data, and technical & white papers, Research dive deliver the required services to its clients well within the required timeframe. Its expertise is focused on examining niche markets, targeting its major driving factors, and spotting threatening hindrances. Complementarily, it also has a seamless collaboration with the major industry aficionado that further offers its research an edge.

Contact us:
Mr. Abhishek Paliwal
Research Dive
30 Wall St. 8th Floor, New York
NY 10005 (P)
+ 91 (788) 802-9103 (India)
+1 (917) 444-1262 (US)
Toll Free: +1-888-961-4454
Follow us:


This content has been published by Research Dive company. The WiredRelease News Department was not involved in the creation of this content. For press release service enquiry, please reach us at

Editor Details

Last Updated: 20-Nov-2020